Find AC220V Manifold Flat Mount Diaphragm Valve, DC24V Full Immersion Pulse Jet Valve, Goyen Type Dust Collector Pulse Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Home > Products > Meter Seals Series > 3 1/2'' CA102MM Goyen Replacement Dust Collector Valve
The Latest Product Alerts Send Me
3 1/2'' CA102MM Goyen Replacement Dust Collector Valve
Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
Terms of Trade: FOB,CFR,CIF,EXW
Min. Order: 1 Piece/Pieces
Delivery Time: 4-8 Days
Packaging: Box Carton Pallet
Productivity: 10000 sets per week
Brand: BRANDO
Transportation: Ocean,Land,Air
Place of Origin: NINGBO CHINA
Supply Ability: 50000 sets per month
Certificate: CE,ISO,GB
Port: Ningbo,Shanghai,Guangzhou
Basic Info

Model No.: CA89MM

Product Description

CA89MM Angle Type Electromagnetic Pulse Valve


What is a Dust Collector Pulse Jet Valve?
Diaphragm pulse valves are the most important components of a baghouse pulse jet cleaning system.

On a pulse jet baghouse pulse valves (also called diaphragm valves) control the release of air pulses during the cleaning cycle. When the baghouse control board or timer board initiates a cleaning cycle it sends an electrical signal to the solenoids, when then activate the pulse valve. Inside the pulse valve, a rubber diaphragm opens and closes to release the compressed air stored in the air header tank. The air then passes through the valve into the blow pipes above the filters and then is directed down into the filters to clean them.


Technical data of MM Series Full Immersion Manifold Flat Mount Valves:

Model No
CA25MM
CA40MM
CA50MM
CA62MM
CA76MM
CA102MM
Nominal Size
25
40
50
62
76
102
Port Size
mm
25
40
50
62
76
102
inch
1''
1 1/2''
2''
2 1/2''
3''
3 1/2''
4''
Pressure Range
0.3 to 0.8MPa
Temp. Range
Nitrile seals
-40 to 82℃
Viton seals
-29 to 232℃


Overall dimension of CA102MM Goyen Replacement Dust Collector Valve:

CA102MM Goyen Replacement Dust Collector Valve


Details display of CA102MM Goyen Type Dust Collector Pulse Valve:



Spare Parts of Full Immerse Manifold Mounted Pulse Jet Valve:

CA89MM pulse double NBR/VITON diaphragm valve structure and material chart

Part Name Material
Solenoid coil Enamelled wire
Armature assembly SS304, 430FR
Small common cap ADC aluminum (die cast)
Diaphragm NBR (Nitrile, buna-n)
Top end cap ADC aluminum (die cast)
Big spring SS304
Screws SS302
Seal NBR, VITON
Main body ADC aluminum (die cast)

Pulse jet valves must do the following safety inspection before it is officially delivered:

1. Insulation resistance test:
(1) Measure the insulation resistance of the solenoid coil to the outer casing under the specified environmental conditions using a 500V meter with a range of 0MΩ to 500MΩ and an accuracy of 1 meter.
(2) Put the valve in the temperature regulation and humidity control box, and set the temperature to 35 degrees, and the relative humidity is 85%, apply a 50Hz, 250V sinusoidal AC voltage between the electromagnetic coil and the valve body for 1min. Check for breakdown.

2. Anti-vibration test: the valve is fixed on the vibration test bench, after the vibration frequency is 20Hz, the full amplitude is 2mm, after 30min vibration, check whether the fasteners of each part of the valve are loose, whether the work is normal.

3. Diaphragm service life test: Connect the clean air of nominal pressure to the air inlet of the electromagnetic pulse valve, and input the nominal voltage value of 0.1s width and interval of 3s on the solenoid valve, and record the number of continuous or cumulative work of the valve.


Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

 


BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.

4


BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.

1


BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
6


BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.

2


Quick review of BRANDO products:

valve

valves2

pulse valve

armature and coils



Company Info
  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
To:
*Messages:
Your message must be between 20-8000 characters